logo
Wrong email address or username
Wrong email address or username
Incorrect verification code
back to top
Search tags: neo-victorian
Load new posts () and activity
Like Reblog Comment
text 2020-12-05 18:45
20 Best Tweets of All Time About how to restore victorian woodwork Montclair

1. Know your upkeep cycles. Many buildings need tuckpointing upkeep every 50 to 60 years.

2. Match the mortar. New mortar must match as closely as possible in color, consistency, and elevation. Using excessive Portland cement in the mix develops difficult mortars, which can damage old structures.

3. Never ever grind out joints. Just scrubby mortar must be gotten rid of. If someone tells you otherwise, run.

4. Never utilize sealants. Sealers trap wetness, compounding issues throughout freeze/thaw cycles.

5. Replace in kind. Harmed masonry units should be replaced entire or by means of Dutchmen of the exact same product. Spaces filled with putty do not last.

-- Jacob Arndt, Conservation Expert, Architectural Stone Carver

Radiators

6. Do not throttle a one-pipe steam radiator The steam and condensate need to share that restricted space. Keep the valve either completely open or completely closed to prevent water hammering and squirting air vents.

7. Develop an ideal pitch. One-pipe steam radiators must pitch towards the supply valve. Use two checkers under radiator feet-- they're the best sizes and shape.

8. Gain control. Thermostatic radiator valves are an excellent method to zone any radiator and save fuel. Hot-water and two-pipe steam radiators get them on the supply side; one-pipe steam radiators get them between the radiator and the air vent.

Old radiator.

( Photo: Sylvia Gashi-Silver).

9. Get a great surface. Pros agree that sandblasting followed by powder finish offers the best, long-lasting, non-sticky surface-- however don't try this in the house.

10. Do not worry about fires. Even with steam heat, a radiator gets just about half as hot as the temperature level needed to kindle paper, so you can rest simple.

-- Dan Holohan, Author, The Lost Art of Steam Heating.

Woodworking.

11. Use heartwood. Heartwood is constantly the most disease-resistant. Sapwood of most types need to never be used.

12. Rift or quarter-grain cuts are best. These cuts are the most before and after victorian house renovation Montclair stable. Flat grain frequently broadens and contracts seasonally at twice the rate of quartered stock.

13. Set up plain sawn lumber with the heart side up. Flat lumber will use much better with the heart facing up. If there's cupping, the edges will remain flat, and just the center will hump slightly.

14. Learn to utilize hand tools. A lot of historical woodwork was produced by hand tools, and the majority of machine-made millwork (late 19th century and after) was installed with them. Historic woodwork surfaces produced with hand planes can't be replicated by modern machines like sanders.

15. Usage standard joinery. Part repair work ought to be made using traditional joinery rather of non-historic methods like a wholesale epoxy casting of a missing part.

-- Robert Adam, Founder and Senior Consultant, Conservation Carpentry Department, renovating a victorian house Montclair North Bennet Street School.

Slate Roof, refurbishing old houses.

Slate roofing system on a turret, renovating old houses.

Slate roofing system on a turret. (Picture: Nathan Winter Season).

16. Determine your slate.To correctly take care of your slate roof, learn what kind of slate it is. Simply as you can't repair a Chevy with Ford parts, you ought to never utilize New york city red slate on a Pennsylvania gray slate roofing system.

17. Understand your roofing's longevity. If http://query.nytimes.com/search/sitesearch/?action=click&contentCollection&region=TopBar&WT.nav=searchWidget&module=SearchSubmit&pgtype=Homepage#/Montclair Victorian Restoration your roof just has 100 years of longevity and is 95 years old, it's unworthy sinking money into. However a roof with 200 years of durability that's 75 years of ages is a young roof that needs to be highly valued and effectively kept.

18. Examine your roofing system frequently. At least as soon as a year, walk around your house (use binoculars if required) and look at your roofing. If you see missing, broken, or sliding slates, or flashing that looks suspect, call your slater.

19. Look around for quality. Good slaters are out there, however you have to search for them. It's worth the effort to have somebody who truly knows what he's doing.

Like Reblog Comment
text 2020-12-05 18:03
10 Facebook Pages to Follow About how to restore victorian woodwork Montclair

1. Know your maintenance cycles. Many buildings require tuckpointing maintenance every 50 to 60 years.

2. Match the mortar. New mortar should match as carefully as possible in color, consistency, and elevation. Using too much Portland cement in the mix creates difficult mortars, which can damage old buildings.

3. Never ever grind out joints. Only deteriorated mortar must be eliminated. If someone informs you otherwise, run.

4. Never ever utilize sealers. Sealants trap moisture, compounding problems during freeze/thaw cycles.

5. Change in kind. Damaged masonry systems ought to be replaced whole or by means of Dutchmen of the same product. Spaces filled with putty do not last.

-- Jacob Arndt, Conservation Expert, Architectural Stone Carver

Radiators

6. Do not throttle a one-pipe steam radiator The steam and condensate have to share that confined space. Keep the valve either totally open or completely closed to avoid water hammering and squirting air vents.

7. Produce a best pitch. One-pipe steam radiators must pitch toward the supply valve. Usage 2 checkers under radiator feet-- they're the perfect shape and size.

8. Gain control. Thermostatic radiator valves are an excellent way to zone any radiator and save fuel. Hot-water and two-pipe steam radiators get them on the supply side; one-pipe steam radiators get before and after victorian house renovation Montclair them in between the radiator and the air vent.

Old radiator.

( Image: Sylvia Gashi-Silver).

9. Get an excellent finish. Pros agree that sandblasting followed by powder coating offers the very best, long-lasting, non-sticky surface-- however do not attempt this in the house.

10. Don't stress over fires. Even with steam heat, a radiator gets only about half as hot as the temperature level needed to kindle paper, so you can rest simple.

-- Dan Holohan, Author, The Lost Art of Steam Heating.

Woodworking.

11. Usage heartwood. Heartwood is always the most disease-resistant. Sapwood of a lot of types need to never be utilized.

12. Rift or quarter-grain cuts are best. These cuts are the most stable. Flat grain often broadens and contracts seasonally at twice the rate of quartered stock.

13. Set up plain sawn lumber with the heart side up. Flat lumber will wear much better with the heart facing up. If there's cupping, the edges will stay flat, and only the center will hump a little.

14. Learn to utilize hand tools. A lot of historical renovating a victorian house Montclair woodwork was produced by hand tools, and the majority of industrial millwork (late 19th century and after) was installed with them. Historical woodwork finishes produced with hand airplanes can't be replicated by modern machines like sanders.

15. Usage conventional joinery. Element repairs need to be made using traditional joinery instead of non-historic methods like a wholesale epoxy casting of a missing part.

-- Robert Adam, Founder and Senior Consultant, Conservation Carpentry Department, North Bennet Street School.

Slate Roofing, refurbishing old homes.

Slate roof on a turret, refurbishing old houses.

Slate roof on a turret. (Photo: Nathan Winter Season).

16. Determine your slate.To correctly care for your slate roof, find out what type of slate it is. Just as you can't fix a Chevy with Ford parts, you ought to never ever use New york city red slate on a Pennsylvania gray slate roof.

17. Comprehend your roof's durability. If your roof just has 100 years of longevity and is 95 years old, it's unworthy sinking cash into. However a roofing with https://en.wikipedia.org/wiki/?search=Montclair Victorian Restoration 200 years of durability that's 75 years old is a young roofing system that should be highly valued and appropriately kept.

18. Check your roofing regularly. A minimum of once a year, walk your home (use field glasses if necessary) and look at your roofing. If you see missing, broken, or moving slates, or flashing that looks suspect, call your slater.

19. Shop around for quality. Excellent slaters are out there, but you have to search for them. It's worth the effort to have someone who truly understands what he's doing.

Like Reblog Comment
text 2020-12-05 16:55
How to Create an Awesome Instagram Video About victorian house renovation Montclair

1. Know your upkeep cycles. The majority of buildings need tuckpointing upkeep every 50 to 60 years.

2. Match the mortar. New mortar need to match as carefully as possible in color, consistency, and elevation. Utilizing too much Portland cement in the mix develops difficult mortars, which can damage old buildings.

3. Never ever grind out joints. Just deteriorated mortar must be eliminated. If somebody tells you otherwise, run.

4. Never utilize sealants. Sealers trap moisture, intensifying problems during freeze/thaw cycles.

5. Change in kind. Damaged masonry systems should be replaced whole or via Dutchmen of the exact same material. Voids filled with putty don't last.

-- Jacob Arndt, Conservation Consultant, Architectural Stone Carver

Radiators

6. Do not throttle a one-pipe steam radiator The steam and condensate need to share that restricted area. Keep the valve either fully open or completely near prevent water hammering and spraying air vents.

7. Produce an ideal pitch. One-pipe steam radiators need to pitch toward the supply valve. Usage two checkers under radiator feet-- they're the perfect shape and size.

8. Gain control. Thermostatic radiator valves are a fantastic method to zone any radiator and save fuel. Hot-water and two-pipe steam radiators get them on the supply side; one-pipe steam radiators get them in between the radiator and the air vent.

Old radiator.

( Picture: Sylvia Gashi-Silver).

9. Get an excellent surface. Pros agree that sandblasting followed by powder coating gives the very best, long-lasting, non-sticky surface-- but don't try this in your home.

10. Do not fret about fires. Even with steam heat, a radiator gets just about half as hot as the temperature level required to kindle paper, so you can rest easy.

-- Dan Holohan, Author, The Lost Art of Steam Heating.

Woodworking.

11. Usage heartwood. Heartwood is always the most disease-resistant. Sapwood of the majority of types ought to never be utilized.

12. Rift or quarter-grain cuts are best. These cuts are the most stable. Flat grain typically expands and contracts seasonally at twice the rate of quartered stock.

13. Set up plain sawn lumber with the heart side up. Flat lumber will wear much better with the heart facing before and after victorian house renovation Montclair up. If there's cupping, the edges will stay flat, and just the center will hump slightly.

14. Learn to use hand tools. Most historic woodwork was produced by hand tools, and many industrial millwork (late 19th century and after) was set up with them. Historic woodwork surfaces produced with hand aircrafts can't be recreated by contemporary machines like sanders.

15. Usage conventional joinery. Element repair work should be made using traditional joinery instead of non-historic methods like a wholesale epoxy casting of a missing part.

-- Robert Adam, Founder and Senior Advisor, Conservation Woodworking Department, North Bennet Street School.

Slate Roofing, refurbishing old houses.

Slate roofing system on a turret, refurbishing old houses.

Slate roofing on a turret. (Image: Nathan Winter).

16. Determine your slate.To correctly take care of your slate roof, find out what kind of slate it is. Just as you can't fix a Chevy with Ford parts, you must never ever use New York red slate on a Pennsylvania gray slate roofing.

17. Understand your roofing's durability. If your roof just has 100 years of durability and is 95 years of ages, it's not worth sinking cash into. But a roofing system with 200 years of longevity that's 75 years old is a young roof that should be highly valued and properly maintained.

18. Check your roof routinely. A minimum of once a year, walk around your house (use binoculars if essential) and take a look at your roofing system. If you see missing, broken, or moving slates, or flashing that looks suspect, call your slater.

19. Search for quality. Excellent slaters https://en.search.wordpress.com/?src=organic&q=Montclair Victorian Restoration are out there, but you have to search for them. It deserves the effort to have someone who genuinely knows what he's doing.

renovating a victorian house Montclair

Like Reblog Comment
text 2020-12-05 13:32
So You've Bought Montclair Home Restoration ... Now What?

1. Know your maintenance cycles. Many buildings need tuckpointing maintenance every 50 to 60 years.

2. Match the mortar. New mortar must match as closely as possible in color, consistency, and elevation. Utilizing excessive Portland cement in the mix creates hard mortars, which can harm old buildings.

3. Never grind out joints. Just shabby mortar should be removed. If someone tells you otherwise, run.

4. Never ever use sealers. Sealers trap wetness, compounding problems during freeze/thaw cycles.

5. Replace in kind. Damaged masonry systems must be changed entire or by means of Dutchmen of the same product. Voids filled with putty don't https://www.washingtonpost.com/newssearch/?query=Montclair Victorian Restoration last.

-- Jacob Arndt, Conservation Specialist, Architectural Stone Carver

Radiators

6. Don't throttle a one-pipe steam radiator The steam and condensate need to share that confined area. Keep the valve either totally open or totally near to avoid water hammering and spraying air vents.

7. Create an ideal pitch. One-pipe steam radiators should pitch toward the supply valve. Use two checkers under radiator feet-- they're the perfect sizes and shape.

8. Gain control. Thermostatic radiator valves are a terrific way to zone any radiator and save fuel. Hot-water and two-pipe steam radiators get them on the supply side; one-pipe steam radiators get them in between the radiator and the air vent.

Old radiator.

( Picture: Sylvia Gashi-Silver).

9. Get a terrific finish. Pros concur that sandblasting followed by powder coating provides the best, lasting, non-sticky surface-- but do not try this in the house.

10. Do not worry about fires. Even with steam heat, a radiator gets just about half as hot as the temperature required to kindle paper, so you can rest easy.

-- Dan Holohan, Author, The Lost Art of Steam Heating.

Woodworking.

11. Use heartwood. Heartwood is always the most disease-resistant. Sapwood of most types ought to never be used.

12. Rift or quarter-grain cuts are best. These cuts are the most stable. Flat grain frequently broadens and contracts seasonally at two times the rate of quartered stock.

13. Install plain sawn lumber with the heart side up. Flat lumber will wear much better with the heart dealing with up. If there's cupping, the edges will remain flat, and only the center will hump slightly.

14. Learn to utilize hand tools. Most historical woodwork was produced by hand tools, and a lot of machine-made millwork (late 19th century and after) was installed with them. Historical woodwork finishes produced with hand airplanes can't be replicated by modern devices like victorian church interior Montclair sanders.

15. Usage standard joinery. Part repairs must be made using standard joinery rather of non-historic techniques like a wholesale epoxy casting of a missing part.

-- Robert Adam, Creator and Senior Advisor, Conservation Woodworking Department, North Bennet Street School.

Slate Roof, remodeling old homes.

Slate roofing on a turret, remodeling old homes.

Slate roof on a turret. (Picture: Nathan Winter).

16. Identify your slate.To correctly care for your slate roofing, learn what kind of slate it is. Simply as you can't fix a Chevy with Ford parts, you need to never ever use New York red slate on a Pennsylvania gray slate roof.

17. Comprehend your roofing system's longevity. If your roofing only has 100 years of longevity and is 95 years old, it's unworthy sinking cash into. But a roofing with 200 years of durability that's 75 years of ages is a young roofing system that should be highly valued and properly kept.

18. Check your roof frequently. A minimum of when a year, walk around your home (use field glasses if required) and take a look at your roof. If you see missing, broken, or moving slates, or flashing that looks suspect, call your slater.

19. Look around for quality. Excellent slaters are out there, but you have to search for them. It's worth the effort to have somebody who truly knows what he's doing.

Like Reblog Comment
text 2020-12-05 12:44
How to Outsmart Your Peers on before and after victorian house renovation Montclair

1. Know your maintenance cycles. Many structures require tuckpointing upkeep every 50 to 60 years.

2. Match the mortar. New mortar ought to match as closely as possible in color, consistency, and elevation. Utilizing excessive Portland cement in the mix creates hard mortars, which can damage old structures.

3. Never grind out joints. Only deteriorated mortar ought to be removed. If someone tells you otherwise, run.

4. Never ever utilize sealants. Sealers trap wetness, compounding problems during freeze/thaw cycles.

5. Replace in kind. Damaged masonry systems need to be changed whole or by means of Dutchmen of the very same product. Voids filled with putty don't last.

-- Jacob Arndt, Conservation Expert, Architectural Stone Carver

Radiators

6. Don't throttle a one-pipe steam radiator The steam and condensate need to share that confined area. Keep the valve either totally open or fully near to avoid water hammering and squirting air before and after victorian house renovation Montclair vents.

7. Develop a perfect pitch. One-pipe steam radiators need to pitch towards the supply valve. Use 2 checkers under radiator feet-- they're the ideal sizes and shape.

8. Gain control. Thermostatic radiator valves are an excellent method to zone any radiator and save fuel. Hot-water and two-pipe steam radiators get them on the supply side; one-pipe steam radiators get them in between the radiator and the air vent.

Old radiator.

( Picture: Sylvia Gashi-Silver).

9. Get a terrific finish. Pros agree that sandblasting followed by powder covering provides the best, long-lasting, non-sticky finish-- but do not try this at home.

10. Do not fret about fires. Even with steam heat, a radiator gets just about half as hot as the temperature level required to kindle paper, so you can rest easy.

-- Dan Holohan, Author, The Lost Art of Steam Heating.

Woodworking.

11. Usage heartwood. Heartwood is constantly the most disease-resistant. Sapwood of most species must never ever be used.

12. Rift or quarter-grain cuts are best. These cuts are the most stable. Flat grain often expands and contracts seasonally at twice the rate of quartered stock.

13. Install plain sawn lumber with the heart side up. Flat lumber will use much better with the heart facing up. If there's cupping, the edges will remain flat, and only the center will hump a little.

14. Learn to utilize hand tools. A lot of historic woodwork was produced by hand tools, and most industrial millwork http://query.nytimes.com/search/sitesearch/?action=click&contentCollection&region=TopBar&WT.nav=searchWidget&module=SearchSubmit&pgtype=Homepage#/Montclair Victorian Restoration (late 19th century and after) was set up with them. Historic woodwork surfaces produced with hand airplanes can't be replicated by modern-day makers like sanders.

15. Usage standard joinery. Element repairs should be made using renovating a victorian house Montclair conventional joinery rather of non-historic techniques like a wholesale epoxy casting of a missing part.

-- Robert Adam, Founder and Senior Advisor, Preservation Carpentry Department, North Bennet Street School.

Slate Roofing, renovating old houses.

Slate roof on a turret, renovating old homes.

Slate roofing system on a turret. (Image: Nathan Winter Season).

16. Determine your slate.To properly take care of your slate roofing, discover what kind of slate it is. Just as you can't repair a Chevy with Ford parts, you must never use New york city red slate on a Pennsylvania gray slate roofing system.

17. Understand your roof's durability. If your roof only has 100 years of durability and is 95 years old, it's unworthy sinking money into. But a roof with 200 years of durability that's 75 years of ages is a young roofing system that should be extremely valued and correctly kept.

18. Inspect your roof regularly. At least as soon as a year, walk your house (use field glasses if required) and look at your roofing system. If you see missing, broken, or sliding slates, or flashing that looks suspect, call your slater.

19. Look around for quality. Excellent slaters are out there, however you need to search for them. It's worth the effort to have somebody who genuinely understands what he's doing.

More posts
Your Dashboard view:
Need help?