Sew two lengths of cord into the right side of each back corner to tie the cushion to the barstool.Sew around the perimeter of your cushion leaving a  inch open space to pull the cushion right side out. "Barstool covers" is another name for this type of cushion.Hand-sew the openings on your barstool cushions closed.Turn your cushion right side out and stuff with batting. Tie the cord to keep your cushion secure on your barstool. Hand-sew the opening closed. Sew together.

Bar stools with backs are even easier to make cushions for, but cushions for barstools without backs can be simple, too.Unpin the two 3-inch sides and join right sides together.Attach the bottom part of your cushion to the top, right sides facing each other with the boxing strip inside.Attach your cushions to the barstool by tying the cord to the backrest.Instead of attaching cord to your barstools in step 4, cut a strip of fabric 3 inches wide and the length of the perimeter of your cushions plus 1-1/4 inch for seam allowance.

A sewing machine makes it even easier and your cushions stronger, although you could sew each cushion by hand. Sew leaving ½-inch pocket to thread a long length of cord.Barstool Cushions for Stools with Backs* Measure your barstool seat. Fold one side of the long end up  inch and pin.Pin your pattern to the wrong side of your fabric and cut out two pieces, one for the bottom and one for the top.. Make sure that you do not sew the free end of your cord into your seam.* Fold the 3-inch sides over ¾ inch and pin. Sew, leaving the pocket with your cord free.Put your cushion on your stool and use the cord to tighten the boxing strip around the stool.Making a homemade barstool cushion is easy when you have the right tools and materials, plus simple instructions with great results.Use a safety pin to thread cord into boxing strip.

You can always order your China Apertured Film Factory barstool cushions online or find fabric that you like and have your cushions custom made, if you aren't good with a sewing machine.Pull your cushion right side out through the opening and stuff with batting.Barstool Cushions for Backless Stools* Follow instructions 1-3 for Barstool Cushions for Stools with Backs.Making barstool cushions is a very easy craft project.Sew your two pieces of fabric together with the right sides toward each other, leaving a inch opening at the back of the cushion.Attach the unfinished side your boxing strip, right sides facing each other, to the top piece of your cushion.Trace your measurements on butcher or parchment paper and add  inches for seam allowance. Gussy up your rustic barstools with cowboy barstool cushions or give your kitchen bar stools a shabby chic feel with gingham fabric. Brand new cushions can definitely help you create mood at your bar.

As a restaurant owner, you need to take care of thousands of things including your staff, customers, food quality, hygiene, the interiors, and many more. One of the major things you need to care about is the proper flow of electricity and earthing of cables.

Electrical power is part of the modern lifestyle. But, if we don't handle them with care then there are chances of electrical hazards. It often leads to burns, shocks, and electrocution. It is necessary to be aware of any potential electrical risks.

Food service industries are the biggest users of electrical equipment and appliances. Long term and frequent use can cause wear and tear in appliances making them dangerous. This gets compounded by the fact that the staff is under immense pressure to get materials and prepare them all the time. It is one of the major reasons why restaurant owners give the least importance to safety and maintenance.

But as an owner, you need to understand the importance of keeping your restaurant secure and away from electrical hazards.

Below are some of the things you need to take care of as a restaurant owner:

2. Keep electrical appliances away from water:

    

4. We all know how dangerous it can be if water and electricity get mixed. Remember to turn off the appliances if they are near wet areas. If by mistake water spills near the electric box, then make sure to clean it immediately.

   Additionally, remember not to touch electric appliances with wet hands as you can get shocked and consequences can be bizarre.

6. Proper installation of electric appliances:

    

8. If you are renovating your restaurant or even starting a new one, then make sure that professionals properly carry out installments of electric appliances. You should never try to do the installation or play with wires on your own. Ensure that the equipment inspection, testing, and tagging are proper. These are a few of the things you need to do to avoid any electrical hazards.

10. Be alert and aware:

     

12. While working with cables like c7 power cord or c13 to c14 power cord, you need to be alert and aware. Ensure that there are no exposed wires, frayed wires, or signs of smoke coming out of any wires/appliances. If any of these things are happening then make sure that you immediately call your electrician. Additionally, also make sure to remove faulty electrical equipment from the kitchen if any, and make sure not to reuse them unless you've had them checked out by professional.

     
13. Avoid overloading of power points:

     

15. Don't plug thousands of cables into one outlet or extension cord. It can damage the electrical system or cause a fire. Keep electrical items switched off if you are not using them on a regular basis. Provide proper power points and make sure that power boards are not overloaded and increase protection. Being the owner of a restaurant company, avoid using double adapters and extension leads as well.

17. Hire electricians:

     

19. Hire an electrician to install and repair decommission electrical equipment. You should never do an installation or repair cables or power cords like c13 to c14 power cord, c7 power cord, or any other on your own. There are specially trained electricians who help you with proper wiring, installation, earthing, soldering, and many more.

21. Install safety switches:

     

23. Install safety switches in your restaurant as it helps you in balancing the load of the electricity. Not only has this but also because of proper load balancing, it reduces the risk of electric shock as well. This in the end helps you in having proper safety of your restaurant and also visitors.

25. Provide staff training:

     

27. Make sure that your staff is wearing proper rubber-soled footwear. Train them to turn off the main power if any emergency like situation occurs. They should not touch any person who is shocked while the main power is on.

29. Extension cords:

     

31. Keep power cords away from other equipment while using them. If you use extension cords, store them away from water, hot surfaces, chemicals, and walkways. Avoid using extension cords which are permanent as in future you might face issues removing them. You also need to understand when your extension cord overloads so you can stop working at that time.

Final Words:

Following these steps are necessary to overcome electrical hazards. You need to understand that playing with electricity can turn into the worst of scenarios. Take the necessary precautions while people are around it. As a restaurant owner, you are not only responsible for your employees' safety but also for the customers.

Source: https://www.sooperarticles.com/shopping-articles/electronics-articles/electrical-safety-guide-restaurateurs-1782784.html

Not surprisingly, the U.S. printing press once again announced the launch of OUTDOOR EXTENSION CORD WITH INDICATOR LIGHT the global problem of excess liquidity is destined growing. Some experts said that this may further lead to global inflation and currency turmoil in the markets.Federal Reserve monetary policy decision-making Federal Open Market Committee November 2 to 3 regular meeting held monetary policy decision-making, 3 announced the launch of the second round of quantitative easing monetary policy, the decision before the end of June 2011 to purchase 600 billion U.S. dollars of U.S. 

Treasury bonds to further stimulate the U.S. economic recovery.The committee said the Fed will be implemented gradually after the middle of the plan, is expected to purchase 75 billion U.S. dollars per month long-term U.S. Treasury bonds. Fed is expected, they are buying U.S. Treasury bonds of the average length of 5 to 6 years, 35% held by the temporary relaxation of the ceiling.The Fed also announced that the federal funds rate to 0.25% at 0 level of the same, to maintain the current discount rate unchanged at 0.75%. In response to financial crisis and economic recession, the Federal Reserve in December 2008 to the current federal funds rate to lowest level in history, and has remained at this level.

The banknotes issued by the United States once again, triggering the world's major economies, especially in emerging market countries concerns. Because from the first quantitative easing monetary policy to see the situation, the Fed made a lot of dollars and do not stay in the United States, did not stimulate further private sector investment desire, but a large number of quantitative easing, the Fed made to the new influx of funds national market.

In the past few months, emerging markets asset bubble continues to expand, the rising exchange rate of its currency, rising commodity prices is pushing up inflation expectations in emerging countries.The first round of quantitative easing Federal Reserve monetary policy began Nov. 25, 2008, financial crisis, the Fed announced it would buy government-sponsored enterprises Fannie Mae, Freddie Mac, Federal Home Loan Bank's direct real estate-related debt, Two rooms will be purchased by the Federal Government National Mortgage Association guaranteed mortgage-backed securities, marking the beginning of the first round of quantitative easing. 

Together in March 2009 to the end of the year before the fall of 300 billion U.S. dollars to buy longer-term Treasury securities, Federal Reserve policy of quantitative easing in the first round of the implementation of a total of 1.725 trillion U.S. dollars of assets purchased.April 28, 2010, the Federal Reserve interest rate statement issued after the meeting, not to mention and purchase agency mortgage backed securities and agency debt issues, which marks the first round of the Fed's formal end of quantitative easing.For the United States to restart the printing press, some experts said that in the United States continues to Maintaining a Low Level interest rate policy and massive quantitative easing monetary policy background, this will allow emerging countries to further appreciation of the currency to weaken the emerging countries in global competitiveness ; followed by the influx of hot money led to asset bubbles increase; Furthermore in order to prevent future large outflow of hot money, Malaysia, Thailand and other emerging countries have to suffer to further strengthen capital regulation.