Are you in a hurry printing out some specifics that need to be submitted on time and your Brother printer got jammed? In this article, we will list you the possible chances for the Brother Printer jam along with the solutions that may keep you safe from the Brother printer paper jam error.

Possible reasons for Printer Paper Jam Error

Check the below general instructions to see if you can solve your paper jam error with Brother Printer

• Paper standards
• Command repetition
• Check for any alien objects
• Greased paper pick-up rollers
• Outdated printer driver
• Hardware issues

If these don’t help you solve the Brother Printer keeps jamming issue, you can follow the below-mentioned quick solutions to get your printer back in its original track of printing.

Quick solutions to fix Brother Printer Paper Jam Error

Brother printer users often experience the Paper Jam Error issue even after the jammed paper has removed from the printer. In that case, follow the below steps to clear the paper jam issue from the printer display.

Check the below printer parts to identify and eliminate the Brother Printer Paper Jam Error.

1. Drum unit and toner cartridge

Turn off your printer and open the front cover. Leave the printer untouched for few minutes to hour since the surface remains hot. Now carefully take the drum unit and toner cartridge. Put them on a safe place. After that check if there is any jammed paper and close the front door.

1. Paper tray

Next open the paper tray and see if there is any jammed paper. If so use both hands to gently pull that out from the printer.

1. Back cover

Now open the back cover. Use a torch light to examine the area for any jammed paper.

1. Fuser unit

Gently open the fuser tabs to open the fuser unit. If you find any jammed paper, use both hands to gently pull that out from the printer.

1. Duplex tray

Pull out the duplex tray out of the machine and see if there is any jammed paper. If so use both hands to gently pull that out from the printer.

1. Toner cartridges

Use the green lock lever to take the toner cartridge out from the drum unit. Once you have taken out the toner check the inside for any jammed papers and bits. Then put back the toner inside the drum unit and drum unit back into its place.

After putting back everything in its place, close the printer front cover. Check if the Ready led is on with error led lights off. You can try printing any document to check whether the Brother Printer keeps jamming issue has resolved or not.

Frequently asked questions

• How to Clear Brother Printer Paper Jam from Tray 1?
• How to Remove Unwanted Papers Inside the Brother Printers?
• How to Fix Paper Jam Rear Side of the Brother Printers?

Read More:

• Brother printer driver download
• Brother printer wifi setup
• My Brother printer keeps going offline
• Brother printer setup
• Brother printer support

Generally error 79 is encountered when there is some miscommunication or corruption in following a print request. The error can occur due to any miscommunication between the print spooler and the printer or due to an outdated firmware etc.

Normally the HP printer error 79 is displayed on the printers control panel in two ways

• Error 79 services has been turned off which indicates that an incompatible DIMM has been installed in the printer
• Or HP printer 79 error turn off then on

Troubleshoot error 79 turn off then on error

Generally when this type of error pops up it indicates some internal firmware error. To fix

1. Turn off the printer’s power
3. Now wait patiently for 30 seconds or 1 minute
4. Switch your printer on again
5. Now wait as the printer initialises
6. Make sure you are having and uninterrupted power supply. Hence if you using any power search remove it and connect the printer plug directly to the power socket.
7. In case your HP printer offline error is persistent disconnect all the power cables and run a power cycle
8. If the printer comes back to its running status check if there are any available firmware update
9. To update the firmware follow the steps

• go to the official site of HP
• Then go to the HP support navigation
• Select your driver and click to download
• In the search box enter your printers name and number and the next step go to the module name list.
• go to the operating system section and scroll down to the link which is independent of any operating system
• Now click on the download button on the latest firmware
• Click ok to confirm download
• The location of the file and follow the on-screen instructions to complete installation

Troubleshoot HP printer error 79 DIMM error

Sometimes the 79 service error HP LaserJet pro 200 or in Deskjet or in any other model pops up when you install a memory DIMM on your printer.

1. Begin with switching off the printer
2. First remove the DIMM and then put it back ensuring that is placed properly on the printer
3. Now turn on and run a test print

Reinstalling of drivers

Many a times the HP printer not printing is contributed due to corrupted printer’s driver.

To reinstall

1. Go to the uninstall a program option in control panel and remove the HP printer software
2. Open device manager
3. Go to the print queue option and remove all the HP devices
4. Now restart your computer and the printer driver will automatically reinstall
5. And don’t forget to reinstall the HP printers associated software
6. Run a test print to check HP printer error 79 resolved or not.

Bottom line

In case the error 79 issues don’t resolve check common trivial printer’s issue like HP printer paper jam, power or connectivity issue, printer set at offline mode or printer, hardware issues etc. For further guidance ask experts for advanced troubleshooting help.