All too often the problem is just leaves or perhaps a small piece of cloth that's causing the issue. Quite often all it takes is to splice on a few extra yards of water hose and your problem is solved. You check your swimming pool and notice that the water just isn't as clean as it used to be. Then if everything in the pool area and the hose on the pool vacuum checks out, the next place to go is the pool pump house. If they are flowing correctly then this may be what's causing China Sprayer Pumps the whole problem. This in spite of the fact that you have a pool cleaner hooked up and working.

The volume of the water ports you see should be synchronized in such a way that they create a "current" in your pool to keep the debris from gathering up and settling in a specific area. While you have the hose out you might as well also check the automatic pool cleaner itself to see if it has debris stuck in it that's clogging up? Look to see that all the parts are moving freely, and you may even want to take it to the shallow end were can examine it more closely while you're given it a test run.Listen to the pump to check that it isn't making any "odd noises" that may be indicators that it isn't functioning correctly.

Now if the length of your hose is not the source your problems then perhaps a small crack in it is causing water to escape, leading to a pressure drop. It's lost its sparkle, and debris seems to be gathering up at the bottom of the deep and. Then another thing you might want to do is to close off one end and blow the other to see if there are any hidden holes or cracks you may have missed were water may be escaping. If it's too short the unit may have trouble travelling around the entire perimeter of the pool. Then if that checks out, and everything else does as well, your problem may simply be that the pool or the pump filters are clogged up and in need of cleaning or replacement.

Make sure that not only does it appear to be long enough but that it also has a little bit of "extra slack" so it can move about freely. So your task at hand, is find out what's wrong and remedy it as soon as possible because in the meantime dirt, and debris continues to find its way into it. So step one is to check your inflow and outflow ports on the side of the pool to make sure that the volume is adjusted correctly.com It's an all too common issue. Then moving on from there, the next thing to check out, is to make sure that the hose on the automatic water cleaner is long enough. So remove the entire hose from the pool, and check it from end to end for any hidden cracks.