The Konica Minolta BizHub 420 copier is also known as Konica BIZ420. It is used for the office-grade purpose as it is a multi-purpose machine that can do the tasks. Such as printing, scanning, copying and faxing through the device. It is good for office purpose as it only prints one color that is why called black and white machines. It uses a single toner cartridge of black that is created to be user-replaceable. During the scanning or printing process, most of the user faced problems. Replaced toner cartridge is one such error. If you are also facing the same problem. At that moment, you need to take help from the Konica Minolta printer tech support. 

In this blog, you will get to know the proper way to perform the replacing process of toner easily. All you need to do is follow the below-given steps in order to resolve the problem quickly.

• Open the copier's front cover by rotating it downwards along its hinges located around its bottom edge.
• You need to remove the toner cartridge door by swinging it out and to the left. You will need to release the lock near the door's right edge to do this.
• Pull the toner cartridge holder and then a sliding tray to straight out of the copier.
• Remove the cylindrical toner cartridge by pulling it out and angling the edge nearest you upwards so that you can pull it out of the channel in the toner holder.
• Plug out the new TN-511 toner cartridge from its shipping materials and prepare it by tapping its top and bottom ends on a firm, flat surface, at least five times each. Shake it back and forth at least five times as well. By doing so, you can easily break up any toner clumps that may have formed during shipping.
• Unscrew and remove the cap on the toner cartridge's narrow end.
• Rotate the cartridge so that the arrow mark and ridge that runs the length of its body is pointing up. Insert the end from which you removed the cap into the copier first, and then rest the entire cartridge in the holder. It should look identical to the cartridge that you removed.
• Push the cartridge holder back into the Bizhub 420, close the toner access door and close the front cover. You may get the sound that the toner access door's lock clicks back into place.

Call +(1)-888-846-5560 Konica Minolta Printer Tech Support Number To Get The Best Solution

Hopefully, you are able to solve the problem by following the steps mentioned in the above section. If not, then we recommend you to connect with our Konica Minolta printer support team and avail the service. To get the best and reliable solution you need to call on our +(1)-888-846-5560 toll-free number.

The lights on the front panel of the printer indicate the product status. These lights can be off, on, or flashing, that depends on the product status. The given information describes the most common combinations of flashing lights, what they denote, and how to resolve the issue. For technical assistance, take help from HP Printer Service. Experts will help you in any of your problems and give you the best solution.

Light status

1. All the lights are off

Issue

• The Attention and Power lights are off.

Solution

• Hit the Power switch on the rear of the product to turn on your product.
• If your product does not turn on, detach the power cord from the rear of the product, and then release the power cord from the electrical outlet.
• Connect the power cord back again to the back of the product, and then plug the power cord into the electrical outlet.
• Dab the Power switch on the back of your product to turn on the product.

1. The Attention light is off and Ready light is on

Issue

• Attention light is off and Ready light is on.

Solution

• The product is ready to print. You do not have to do anything.

1. The Ready light blinks and the Attention light blinks

Issue

• The Ready light and the Attention light blink at the same time.

Solution

• The product is preparing. You do not have to do anything.

1. Ready light blinks

Issue

• The Ready light blinks.

Solution

• The product is receiving or loading the data. Wait for the print job to be done.

1. Lights blink in a cycle

Issue

• The front panel lights blink in order from the top to bottom. The cycle remains in this pattern.

Solution

• The product is in cleaning mode. Wait for a while till the cleaning or self-test page prints and the product go back to the Ready state. This process may take up to two minutes.

1. Attention light blinks
3. The product is out of memory.

Solution

The document that you need to print might be too intricate for the product memory capacity. Perform these steps to lessen the resolution of the document.

• Take out the paper from the product.
• Windows XP: Click on the “Start” option, go to Printers and Faxes, double-click the icon for your product, choose your print job, and then hit Cancel.
• Windows Vista: On the task bar, hit the Windows icon, click on Printers, double-click the icon for your product, choose your print job and then hit Cancel.
• In the program which you want to print, hit File, and then click on the “Print” option.
• On the Print dialog box, hit Properties. The product Properties dialog box will appear.
• Hit the Paper/Quality tab.
• In the Print Quality drop-down menu, choose a lower resolution level.
• Hit OK to apply the settings.
• Try to print the document again.

1. The print cartridge door is open.

Solution

Examine the print cartridge door. Open the door and then close it. Dab it down to close it all the way.

1. The product is out of paper.

Solution

Perform these steps to load paper in the product.

• Ensure that the stack of paper contains not more than 150 sheets of paper.
• Hit the stack of paper on a table or other flat surface to arrange the edges.
• Keep the paper into the main tray with the short edge toward the product and the print side should be up.
• Put the paper width and paper length guides toward the pile of paper till they rest against the edges of the stack.

1. Print cartridge is installed incorrectly.

Solution

Perform these steps to reinstall the print cartridge.

• Raise the print cartridge door, and then take out the print cartridge from the product.
• Change the print cartridge in the product. Ensure that it snaps into the place.
• Shut the printer cartridge door.

1. There is a paper jammed in the product

Solution

Perform these steps to clear the paper jam.

• Take out all the loose paper from the main tray, the priority feed slot, and from the output bin.
• Raise the print cartridge door, and then take out the print cartridge from the product.
• With both your hands, hold the paper where it is most visible that includes the middle and then properly pull the paper out of the product.
• Examine the inside of the product for any torn pieces of paper or labels, and then take out them.
• If any jammed paper residue is there in the input tray or the output tray, hold it with both your hands and slightly remove it.
• Insert the print cartridge again, and then shut the print cartridge door.

1. All the lights are on

Issue

The product encounters a fatal error.

Solution

• Release the power cable from the electrical outlet.
• Wait for a while like for 30 minutes, and then attach the power cable into the electrical outlet.
• If you have done all the steps described above and are still undergoing a problem, then service your product.

So, these are the basic information about the light indicators of HP LaserJet 1018 and 1020 Printer Series. If you want to know more about it, then contact HP Printer Tech Support Number. Experts will help you out in all your doubts.

On the off chance that your HP printer's status shows "HP Printer In Error State", there might be a few issues with your utilizing printer itself. To dispose of this problem, turn-on your printer and associate your PC by Wi-Fi or link. Check it for low ink, and guarantee that the spread isn't opened and the paper isn't stuck. On the off chance that yet such a mistake message spring up on your PC, at that point take HP Printers Support from our accomplished and skilled tech-experts. They will give you some productive arrangements which will successful for you.

No should be stressed as though you are getting neglected to eliminate this mistake from your HP printer Installation Support Number. We have noted down some ideal strides in this blog through which you can get arrangements in your grasp once you experience them. In this way, don't cause yourself to debase as we probably am aware each and every question has some particular answer yet the thing just we need to do is to placed exertion in finding that arrangement.

Ventures To Fix HP Printer in Error State Issue

 Here are not many basic ways to work to fix this hiccup. Have a look at those focuses:

Check The Printer's Connection

 The first and most significant thing you have to do is to ensure that every one of the associations with your printer is appropriately associated. In this way, you need to check the associations between your PC and printer. On the off chance that the associations are not suitably settled, make it and run a test print work.

Restart Your Device

 Restarting the diverse associated gadgets can resolve the issue HP printer in blunder state. In this manner, take a stab at fueling off your PC and your printer totally. Leave them in this state for some time and afterward walk out on to discover if the issue has gone.

Check Your Printer is Online or Offline

Click on Start catch and select Control Panel

Choose 'Gadgets and Printers' choice

Check if the printer is disconnected or on the web. In the event that it is on the web, the status will appear as 'Prepared'

Set the printer online by right tapping on Printer and afterward pick the choice saying 'Use Printer Online'.

This will change the presentation to prepared

Ensure That The Paper Is Loaded

 It is essential to check whether the paper is stacked on the printer plate. Before doing this, you need to give affirmation that the printer is killed. Presently, turn on your printer and hang tight for quite a while until your printer is in the prepared state. Presently check for the mistake.

Update Printer driver

Try not to leave your desire for getting the consistent printout in a jiffy. It is evident to look at the fundamental obligations to let the printing office. Obviously, you should check the presentation of printer driver as it is responsible for sending print guidance to the printer without diving too deep electronic gathering and history. The inclination of the update printer driver is required to get consistent printing. There ought not to be an incorporation of an obsolete printer. Else, you will experience blunder message while printing your record. Nothing needs to do extra expect you should introduce a simple printer driver either in your printer and PC. The establishment of this product tends you to naturally introduce the printer drivers among the most recent adaptation.

Get full freedom from undesirable dangers in the printer driver

 All through the internet, various dangers and infection have happened in it. With the presence of progressing infection issue, the printer driver programming can't work appropriately. So as to return this specialized issue, it should tap on the run caught to check each part effectively. To empower this significant advance, you can distinguish the issue and resolve it. Be certain as an expulsion of the issue offers surety to amend the specialized issue. It is safe to say that you are as yet a casualty of blunder code landed on programming piece? All things considered, you don't have to adjust to the progression of disappointment again and approach the convenient help of our specialized group.

On the off chance that the comparative mistake is as yet persevering, at that point don't sway off! As we have the technically knowledgeable individual for your assistance. You just require introducing the product HP Printer Support Contact Number by which you can find the solution. Besides, assist with the specialized group by means of setting an approach to the helpline number and benefit dependable help.

Printwithus provides online hp printer customer support through toll-free number +1-833-300-3005. Our Experts helps you to find the best solutions for hp wireless printer setup, desktop, laptops, and toners. If you are facing with any printer issue like as printer installation, print quality, ink cartridge, toner, and wireless connectivity with a network then visit our website, chat with our technical expert team or call our technical support and resolve your printer problem instantly.

https://bit.ly/2V0pj69

It is a much-known fact that before you can start using any kind of printer, you must first install it because, without installation, it is pretty much a useless tool since it won’t be able to function at all. And sometimes while trying to install the printer, you get error messages saying the installation has failed. Almost every printer owner in the world has come across such situations in their life and it is very common. It is also prevalent in HP printers. Often at times, while trying to install HP printers and its software, you will see error messages regarding its installation. This happens due to faulty errors or mistakes while applying the steps or due to network or internet problems. So if you are looking forward to knowing how to fix installation error in the HP printer, you can give this blog a read.

There are certain steps you must carry out to fix installation error in an HP printer. And these steps have been explained to you under the points below:

Step 1: Try restarting the Computer, Printer, and router

• Firstly, turn off the router. Do so, by unplugging the cord or pressing the power button.
• Secondly, turn the printer off and unplug the USB or Ethernet cables.
• Now, make sure to close or shut down any running programs and shut down the computer.
• Now reconnect and turn on all the devices you have shut down after waiting for some few minutes.

Step 2: Uninstall the HP software and the driver from the system

• Start off by disconnecting the USB cable from the printer.
• Then go to ‘programs and features’ and under this search the name of your printer and uninstall it.
• When you see a User account control message, click the ‘yes’ button. And simply follow the instruction displayed on the screen to remove the software, and after it is complete, perform a restart of the computer.

Step 3: Perform a Repair of the system files

• Before you begin, close all running apps and programs on your PC.
• Run the Command prompt as administrator and type in ‘sfc/scannow’ and press enter.
• The utility tool will scan and repair any damaged files on your computer.
• After the repair has been done, try to install the software again.

These methods are to be performed if you want to fix the installation error of your HP printer. However, if you find yourself facing some technical glitches or errors you can contact hp printer tech support to get help from certified employees who have years of experience in troubleshooting HP printer errors and problems.

Resource Link:

https://www.printerservicenumber.com/how-may-i-fix-installation-error-in-hp-printer/

Previous Blog

What to do when HP Printer cannot print From a Mobile Phone?