1. Mold opening, mold clamping, thimble and other actions adopt high-precision screw nuts with a transmission accuracy of 0.01mm.

2. The linear guide rail transforms the traditional reciprocating sliding guide into a rolling guide, which improves the positioning accuracy, reduces the mechanical cost and greatly saves electricity, and can maintain high precision for a long time.

3. Adopt a new type of load cell to accurately control the back pressure to achieve stable precision injection.

4. The timing belt wheel and timing belt have simple structure, convenient installation, high transmission accuracy and low noise.

5. Centralized lubrication and volumetric proportional distributor are used to ensure sufficient lubrication at each point. Non-reverse ring (over apron)---As the name suggests, the role of the non-reverse ring is to prevent reverse. It is a part that prevents the plastic melt from leaking back during injection. Blow molding machine die head The die head is the transition part connecting the barrel and the mold. Air needle Air needle is the part that connects the die head and the barrel? It only plays a bulging role in the plastic blowing process.

Feeding hopper Feeding hopper is a component that stores plastic raw materials, and some add heating and blowing devices on the feeding hopper to make the dry hopper pneumatic blowing bottle electric control principle: Servo system: the output of the object's position, orientation, state, etc. An automatic control system capable of following any changes in the input target (or given value). The main task of the servo is to amplify, transform and adjust the power according to the requirements of the control command, so that the torque, speed and position output of the drive device are very flexible and convenient. Mode-locked servo motor The working principle of the servo motor: The servo motor is a typical closed-loop feedback system. The reduction gear set is driven by the motor. Its terminal (output end) drives a linear proportional potentiometer for position detection.

The potentiometer converts the corner coordinates A proportional voltage is fed back to the control circuit board. The control circuit board compares it with the input control pulse signal to generate correction pulses, and drives the motor to rotate in the forward or reverse direction, so that the output position of the gear set matches the expected value, so that the correction The pulse tends to be 0, so as to achieve the purpose of accurately positioning the servo motor. Servo motor control: The standard servo motor has three control lines: power, ground and control. The power line and the ground line are used to provide the energy required by the internal motor water bottle blowing machine and control circuit. The voltage is usually between 4V-6V.

The power supply should be isolated from the power supply of the processing system as much as possible (because the servo motor generates noise). Even a small servo motor will pull down the voltage of the amplifier under heavy load, so the power supply ratio of the whole system must be reasonable. Input a periodic positive pulse signal. The high level time of this periodic pulse signal is usually between 1ms-2ms, and the low level time should be between 5ms and 20ms.

What are the influencing factors of the blow molding process of a water bottle blowing machine ?

1. Compressed air in blow pressure has two functions, inflation and cooling. Low viscosity, small volume or thick-walled parts should uselow air pressure; high viscosity High pressure should be used for large-volume or thin-walled parts or just have one

pet bottle air compressor to help.

2.Blowing speed In order to shorten the blowing time, in order to help the product obtain a more uniform thickness and a better surface, the inflation speed should be as large as possible, but the speed is too fast, it will easily cause the following phenomena: ① create a vacuum in the air, make this part When the parison is completely inflated, the indented part will form a diaphragm.

② The parison in the die part may be broken by the rapid air flow. 3. Inflation ratio is usually controlled at 2-4 times. If the inflation ratio is too large, the shape stability of the product is poor, and too small will cause uneven wall thickness. 4. Mold temperature and cooling time If the mold temperature is too low, the ductility of the plastic at the jaw will be reduced, it will not be easy to inflate, and the part will be thickened, and the molding is difficult. If the mold temperature is too high, the cooling time will be extended and the production cycle will be long. If the time is too short, insufficient cooling may easily cause deformation of the product, increase shrinkage, and matte surface. 5. The molding cycle includes extrusion parison, cutting parison, mold clamping, air blowing, cooling, deflation, opening the mold, and removing the product. Wait for the process. The selection principle of the molding cycle is as short as possible on the premise of ensuring that the product can be shaped.

Some of the best stainless steel protein shaker has become widely popular in the last few decades, mainly because of the benefits they provide to workout enthusiasts. They are reliable, durable, friendly, and highly dependable. The market of protein shakers is enormous, and many brands do understand its potential, especially for product-focused promotion. Read More: - https://www.storeboard.com/blogs/shopping/how-to-design-best-shaker-for-product-focused-promotion-/1812402

How green is your bottle? - The question is worth asking in the era where consumers are more educated and ‘go green’ incantation is on its full swing. The stainless steel water bottle suppliers are broadly acknowledged for drinkware without discarding endless plastic bottles. Read More: - https://jiuruihousewares.blogspot.com/2020/01/stainless-steel-bottles-give-back-to.html

Earth Day reminds us of our responsibility for the planet’s environment. It’s an initiative against pollution, where people and organizations around the globe come together to be a part of the change. But the real question is, how are you celebrating and honoring Earth Day? It all starts with a small change that contributes to a big difference. Smartening up your lifestyle with stainless steel tumblers is undoubtedly one of them.

It’s not hidden anymore; the accumulation of plastic bottles adversely affects marine & wildlife. Globally, humans discharge millions of plastic bottles every year, and 90 % of them are not recycled. The reason is, plastics are so difficult to recycle and later end up in a landfill or incinerator. They contain harmful bisphenol A [BPA] and release unpleasant fumes, which adversely affects the health of a human being.

METAL CAN BE RECYCLED INFINITELY. Stainless Steel Tumbler, mugs, bottles, and flask are green products, eco-friendly, and safe for nature & human being. It is 100% recyclable and doesn’t even produce toxic fumes. Your decision to choose a stainless steel tumbler for everyday use might encourage others. Also, if the stainless steel is not recycled, it will find its way for many practical applications. In addition, stainless steel tumblers have the potential to withstand the test of time and can stick for almost a decade. Today, stainless steel has become a preferred material for green construction throughout the world for three reasons: 

100% RECYCLABLE:-

Stainless steel flasks and containers can be recycled effectively multiple times. You’ll be surprised to know that half of the stainless steel materials are scrap material and can be further recycled infinite number of times without losing its fundamental properties such as strength, durability, and corrosion resistance. On the contrary, stainless steel has magnetic properties, which makes it easy to separate via a recycling machine.

Minimal CO2 Emissions:-

Compared to other materials, stainless steel yields minimal CO2 emission, which eventually safeguards the well-being of workers and makes recycling a promising quest. Surprisingly, its carbon footprints are much lower than aluminium & magnesium and don’t even damage the environment. 

Long Life Span:-

Stainless steel bottles are long-lasting and one of the most durable products available in the market. It’s a container with a perfect combination of safety, sturdy, durable, and also BPA-free. The incredible corrosion resistance makes it a smarter choice to clench your thirst. If not centuries, stainless steel tumblers can last for a decade. The longevity and sturdy built quality also uncover many practical usages, making them a subtle choice for gym, office, travelling, trekking, etc. 

5 Reusable Tumblers for Eco-Friendly Hydration:-

Insulated Tumbler with Silicone Grasp and PP Cover ODM Factory. This tumbler has a cap that creates an airtight vacuum seal and a great grip for outdoor adventure. The bottle keeps cold liquids cold and hot liquid hot for 6-8 hours and available in many colours.

Insulated Tumbler with Steel Cover and Straw. If you are looking for a funky design and tumblers for backpacking, camping, travelling, etc., then this is it. Available in more than one colour, it is safe, and the built-in straw provides you with the convenience to drink directly without waiting.

280ml Tumblers and Mugs. 280 ml mug might not be your foremost choice, but it is a friendly choice among coffee lovers, especially during winters. The ergonomic design of 280 ml mug enables a consumer to drink coffee while on the move and even provides reusability for other beverages.

Insulated Tumbler with PP Handle and Cover.  The outfitting of pp handle and pp cover makes it suitable for those who seek a good gripping technology. The lid prevents spilling up and provides the utmost convenience and extra protection.

Egg Shaped Tumbler. A cool and unique choice for your daily jolt of caffeine, the egg-shaped tumbler is the latest addition, a bit whimsical and funny. The clever mug design keeps your hand safe and has a lovely insulation cuff. It does give you a cheeky surprise.

Hope this lovely addition motivates you to go green. However, there’s more to choose from. Don’t miss out on your opportunity to explore the latest stainless steel tumbler. Contact Jiurui Houseware today.