The first-time setup- installation for HP Officejet Pro 9015 series printers is covered here. This document applies to the HP Officejet Pro 9010, 9015, 9018, 9020, and 9025 all-in-one printer family.

Step-1 Remove the packaging materials from your printer and unbox it.

To begin, open the printer's box. Then take out the user guide and the ink cartridges that come with it. Remove the printer device from the packaging box now. Next, Remove the foam from both sides of the printer and set aside the power wire. Now take the printer out of the plastic bag. Remove all of the taps from the front of the printer as well as the control panel window. Now Close the scanner lid after removing the foam-based layer by lifting the cover.

Step-2 Make the necessary cable connections and preferences.

To begin, connect one end of the power line to the printer's back and the other end to a wall outlet. Your printer will now start (turn ON) on its own. Then, from the printer control panel, pick your desired language and confirm. After that, you must choose your nation and then confirm your selection.

Step-3 Ink cartridges are installed.

To begin, open your printer's front door and lift the cartridge access door. Remove the plastic insert when the carriage is idle or quiet. Now remove the cartridges from the packaging and unroll them. Next, pull the tab from the plastic tab on the black cartridge to reveal the vent slot. Hold the cartridge by its sides and twist the cap to remove it; you may need to use a lot of force. To avoid clogs, ink failure, and improper electrical connections, do not touch the ink port or metal contacts. Match the letter and colour of the cartridge to the carriage's matching slot. After that, slip the cartridge into the slot while holding it by its sides.

Step-4 Place a stack of papers in the input tray.

The primary paper tray must first be slid out. Remove the cardboard constraint and tape after that. Place the paper guidelines at the top of the stack. After then, fill the stack with regular A4 paper. Make sure the paper stack is pushed all the way into the tray. Now adjust the paper guides so that they are in contact with the stack of papers. If a notice appears on the control panel screen, slide in the paper tray and then tap OK.

Step-5 An alignment page should be printed and scanned.

Firstly, remove the output tray by sliding it out. An alignment page will now print on its own. Before you start printing papers, make sure you scan the alignment page. So, open the scanner lid and set the paper on the scanner glass, print side down. For optimal positioning, please refer to the scan instructions. Now close the scanner lid and then press the Scan button. When the message "Alignment Successful" shows on the screen, press OK to finish the hardware setup or installation.

Read More:

Installation of HP Officejet Pro 8710-8720 series first-time printer setup

HP Officejet Pro 8600, 8610 series installation first-time printer setup

Installation of HP Officejet Pro 8020-8030 series first-time printer setup

HP Officejet Pro 6968-6978 series installation first-time printer setup

HP OfficeJet professional 8025 – 123.hp.com/ojp8025

HP OfficeJet professional series has some best at school models which might be utilised for print, fax, and replica functions. Moreover, they additionally arrive with associate array of different options like ePrint, Mopria, and AirPrint creating them fascinating to the millennials. browse on more to explore however you'll be able to setup and use this 123.hp.com/ojp8025 printer on varied operational systems.

Connect H.P. OfficeJet professional 8025 Wired and Wireless Network

The 123.hp.com/ojp8025 printer may be found out in an exceedingly wired and wireless surroundings. One factor that has got to be unbroken in mind for each wired and wireless associations is that the network connection utilized in the printer or the connecting device/Wi-Fi ought to be identical and not completely different. A wired or wireless association within the 123.hp.com/ojp8025 is carried on effectively on condition that identical network is employed for the printer and connecting device/Wi-Fi.

The network fluctuation could also be borderline in wired association compared with a wireless association. A main disadvantage of the wired association is its immobility.

A wireless association linking may be setup within the 123.hp.com/ojp8025 by suggests that of the Wi-Fi network. Wireless printing became similar with web connections while not that several tasks these days would be not possible to complete. you'll be able to order print jobs from a mobile or pill and generally, network fluctuations can be a tangle enclose of wireless association.

Wireless Setup victimization fashionable operational Systems

For a triple-crown installation of operational systems, please use administrator privileges. 2 styles of OS square measure normally wont to setup associate OfficeJet 8025 printer.

They are

Apple Mac
MS Windows

1. 
   Following square measure the steps to setup a the 123.hp.com/ojp8025, through Apple mackintosh and Windows tenHP OfficeJet professional 8025 Setup for Apple mackintosh
   123.hp.com/ojp8025
   123.hp.com/ojp8025
2. First of all, move to your mackintosh and open an internet browser window and Open, 123.hp.com/setup
   A web-page showing the Install printer software system opens, click on the transfer possibility
   Once the transfer is over, you must open the file and settle for the terms and conditions and continue
   Switch on the printer and verify if the network property is on
   Connect your mackintosh to the wireless network that you just use in your printer
   Click OK within the pop-up, “Prepare for H.P. printer setup”
   Successively, opt for your printer from the list of printers and faucet continue
   If your printer isn't compatible with the printer software system then you won’t notice its name
   Then, move to the H.P. support website and transfer the newest drivers for 123.hp.com/ojp8025 printer so continue your setup method
   Accordingly, choose your printer and faucet continue and make sure your wireless network name
   Subsequently, click permit succeeding crop up. currently the printer connects, next, faucet on continue and navigate through some screen prompts
   Select your choices and click on on the install button
   Subsequently, click on continue
   Follow the remaining screen prompts and cling per the directions to begin printing together with your H.P. printer

HP OfficeJet professional 8025 Setup for Windows ten

In the initial place, open the web-link 123.hp.com in your Windows laptop
Immediately, associate on-screen notification, ‘Install printer software’ would seem
Check if the facility is on in your printer and click on on transfer button
The installation file saves within the prescribed location
Subsequently, open the saved installation file for extraction
Next, faucet on continue within the succeeding popup
Additionally, choose the checkbox to simply accept the Installation agreements and settings and faucet continue
Finish the software system installation by following the on-screen directions
When your printer isn't accessible, faucet on the choice “My printer isn't Shown” and click on continue and transfer your printer software system and drivers and later resume the setup method
Afterward, choose Wireless network, so faucet the continue button
Now, click on the printer and faucet the continue button
Additionally, navigate the following prompts and end your wireless setup
Now plug your USB cable to your laptop and printer
After sound on continue, H.P. straightforward begin saves your settings and currently undo your USB cable and faucet continue
Download the printer software system and end responding to the following prompts
Your H.P. Wireless association in 123.hp.com/ojp8025 printer victimization Windows ten is setup
Should you have additional queries on the wireless setup procedures of the 123.hp.com/ojp8025 printer, please keep in mind to contact U.S.. we've a client support team within the offing to answer you. Moreover, we provide support help over mail/chat and decision @tel:+1-844-672-7782

On the off chance that your HP printer's status shows "HP Printer In Error State", there might be a few issues with your utilizing printer itself. To dispose of this problem, turn-on your printer and associate your PC by Wi-Fi or link. Check it for low ink, and guarantee that the spread isn't opened and the paper isn't stuck. On the off chance that yet such a mistake message spring up on your PC, at that point take HP Printers Support from our accomplished and skilled tech-experts. They will give you some productive arrangements which will successful for you.

No should be stressed as though you are getting neglected to eliminate this mistake from your HP printer Installation Support Number. We have noted down some ideal strides in this blog through which you can get arrangements in your grasp once you experience them. In this way, don't cause yourself to debase as we probably am aware each and every question has some particular answer yet the thing just we need to do is to placed exertion in finding that arrangement.

Ventures To Fix HP Printer in Error State Issue

 Here are not many basic ways to work to fix this hiccup. Have a look at those focuses:

Check The Printer's Connection

 The first and most significant thing you have to do is to ensure that every one of the associations with your printer is appropriately associated. In this way, you need to check the associations between your PC and printer. On the off chance that the associations are not suitably settled, make it and run a test print work.

Restart Your Device

 Restarting the diverse associated gadgets can resolve the issue HP printer in blunder state. In this manner, take a stab at fueling off your PC and your printer totally. Leave them in this state for some time and afterward walk out on to discover if the issue has gone.

Check Your Printer is Online or Offline

Click on Start catch and select Control Panel

Choose 'Gadgets and Printers' choice

Check if the printer is disconnected or on the web. In the event that it is on the web, the status will appear as 'Prepared'

Set the printer online by right tapping on Printer and afterward pick the choice saying 'Use Printer Online'.

This will change the presentation to prepared

Ensure That The Paper Is Loaded

 It is essential to check whether the paper is stacked on the printer plate. Before doing this, you need to give affirmation that the printer is killed. Presently, turn on your printer and hang tight for quite a while until your printer is in the prepared state. Presently check for the mistake.

Update Printer driver

Try not to leave your desire for getting the consistent printout in a jiffy. It is evident to look at the fundamental obligations to let the printing office. Obviously, you should check the presentation of printer driver as it is responsible for sending print guidance to the printer without diving too deep electronic gathering and history. The inclination of the update printer driver is required to get consistent printing. There ought not to be an incorporation of an obsolete printer. Else, you will experience blunder message while printing your record. Nothing needs to do extra expect you should introduce a simple printer driver either in your printer and PC. The establishment of this product tends you to naturally introduce the printer drivers among the most recent adaptation.

Get full freedom from undesirable dangers in the printer driver

 All through the internet, various dangers and infection have happened in it. With the presence of progressing infection issue, the printer driver programming can't work appropriately. So as to return this specialized issue, it should tap on the run caught to check each part effectively. To empower this significant advance, you can distinguish the issue and resolve it. Be certain as an expulsion of the issue offers surety to amend the specialized issue. It is safe to say that you are as yet a casualty of blunder code landed on programming piece? All things considered, you don't have to adjust to the progression of disappointment again and approach the convenient help of our specialized group.

On the off chance that the comparative mistake is as yet persevering, at that point don't sway off! As we have the technically knowledgeable individual for your assistance. You just require introducing the product HP Printer Support Contact Number by which you can find the solution. Besides, assist with the specialized group by means of setting an approach to the helpline number and benefit dependable help.

It is a much-known fact that before you can start using any kind of printer, you must first install it because, without installation, it is pretty much a useless tool since it won’t be able to function at all. And sometimes while trying to install the printer, you get error messages saying the installation has failed. Almost every printer owner in the world has come across such situations in their life and it is very common. It is also prevalent in HP printers. Often at times, while trying to install HP printers and its software, you will see error messages regarding its installation. This happens due to faulty errors or mistakes while applying the steps or due to network or internet problems. So if you are looking forward to knowing how to fix installation error in the HP printer, you can give this blog a read.

There are certain steps you must carry out to fix installation error in an HP printer. And these steps have been explained to you under the points below:

Step 1: Try restarting the Computer, Printer, and router

• Firstly, turn off the router. Do so, by unplugging the cord or pressing the power button.
• Secondly, turn the printer off and unplug the USB or Ethernet cables.
• Now, make sure to close or shut down any running programs and shut down the computer.
• Now reconnect and turn on all the devices you have shut down after waiting for some few minutes.

Step 2: Uninstall the HP software and the driver from the system

• Start off by disconnecting the USB cable from the printer.
• Then go to ‘programs and features’ and under this search the name of your printer and uninstall it.
• When you see a User account control message, click the ‘yes’ button. And simply follow the instruction displayed on the screen to remove the software, and after it is complete, perform a restart of the computer.

Step 3: Perform a Repair of the system files

• Before you begin, close all running apps and programs on your PC.
• Run the Command prompt as administrator and type in ‘sfc/scannow’ and press enter.
• The utility tool will scan and repair any damaged files on your computer.
• After the repair has been done, try to install the software again.

These methods are to be performed if you want to fix the installation error of your HP printer. However, if you find yourself facing some technical glitches or errors you can contact hp printer tech support to get help from certified employees who have years of experience in troubleshooting HP printer errors and problems.

Resource Link:

https://www.printerservicenumber.com/how-may-i-fix-installation-error-in-hp-printer/

Previous Blog

What to do when HP Printer cannot print From a Mobile Phone?